How to choose a snowboard

post-img

Choosing a snowboard could be a discouraging proposition these days. Totally different shapes, profiles, board varieties, weight categories, and models fill the walls of even the tiniest snow retailers,and searching on-line may be not possible if you do not apprehend what you’re searching for. However, the big variety / wide selection / large choice of models means you’ll invariably notice a snowboard in your price range with a bit inside knowledge.

Part1

Choosing The Correct Size Board

  1. Image titled Choose a Snowboard Step 1
    1

    Choose a board size.

    Snowboards are typically measured from tip to basketball shot centimeters. To size a board, place the tip on the bottom and stand the board up to your face. — the highest of the board ought to reach your chin.[1] but, there are plenty of advantages buying a shorter or longer boards. In general, shorter boards are more maneuverable and longer boards are quicker.

    • Beginners ought to select a board on the longer end — one that reaches their nose when stood up, as an example.

    • Heavier riders ought to consider slightly longer boards to distribute their weight.

  2. Image titled Choose a Snowboard Step 2
    2

    Make sure the board is suitable for your weight.

    On the back of each board should be a weight classification, so get the correct board for your body. If you are too heavy you’ll break the board, too light-weight and you’ll have trouble maneuvering.

  3. Image titled Choose a Snowboard Step 3
    3

    Choose the right board width for your feet.

    The width of a board must suit your body, and most people are fine with a standard board dimension of 246-255 millimeters. Your snowboarding boots ought to barely suspend over the sides of the board after you stand on that, with no over an in. of your toes and heels protruding on either aspect. Generally, those with a US men’s size eleven or US women’s size eleven.5 shoe and bigger ought to get a “wide” board (250+ millimeters).

    [2]

    • If your foot is smaller then a toilet facility seven or a women’s nine you must select a slender board (235-245 millimeters).[3]

  4. Image titled Choose a Snowboard Step 4
    4

    Use the shortcut radius and waist width to tell how well a board turns. These two measurements tell you how easy it is to turn a board, and you may see them listed on some boards. In both cases, the smaller the number, the easier the board is to turn with. Beginners can ignore shortcut radius at first, as basic boards usually sit somewhere in the middle.

    • Shortcut Radius: This is the measure of how big a circle you board would make if the curve of the edge was extended to a complete circle. The smaller the number, the smaller the circle.
    • Waist Width: This is the measure of the board at it’s thinnest point. The smaller the waist width the faster the board reacts to your turning motions.[4]

Part2

Choosing the Right Style Board

  1. Image titled Choose a Snowboard Step 5
    1

    Decide what shape of board you want. Boards are either directional or twin-tip. Directional boards are built with one front end and are made for speed and stability going down hills. Twin-tips have identical front and back ends — perfect for stringing together tricks at the terrain park. It is easiest for beginners to get twin-tip boards to eliminate mistakes.

    • There are also “directional twin-tips,” which are hybrid shapes designed for any rider.
  2. Image titled Choose a Snowboard Step 6
    2

    Think about the camber, or profile of the board. Once upon a time, all boards came in the same shape. No more. Today, there are a variety of designs for different riders known as camber. This corresponds to the profile of the board, or what parts touch the ground. Consider renting 2-3 types of board before buying to see what camber you prefer. (Note: Camber refers to the general style of the board (camber type) and a specific style of board.) Different camber types include:

    • Camber Board: The most common board, cambers touch the ground near the tips but curve up in the middle. When you stand on the board you push the center down, but it retains some of the pop for jumps.
    • Rocker: The opposite of camber boards, rockers curve down. This keeps you tips out of the snow, increasing maneuverability.
    • Flat: Exactly what it sounds like, flat boards curve up slightly at the tips but are flat throughout. While flat boards are vulnerable to caught edges in the snow, this shape is the easiest to turn and floats well on fresh powder.
    • Hybrid: Many companies have started to mix and match the camber, rocker, and flat boards, making shapes for any rider. Boards like the “rocker/camber/rocker,” for example, can handle a variety of situations and terrains.[5]
  3. Image titled Choose a Snowboard Step 7
    3

    Choose the stiffness of the board. There’s no consistent rating system for flex, so a 5 from Burton might not be as stiff as a 5 from Evo. Still, most companies use a 1-10 classification system, where 1 is the most flexible (soft) and 10 is the least (stiff). The stiffer the board is the faster it moves, but more flexible boards are easier to turn with.[6]

    • Soft, flexible boards are best for beginners and trick riders thanks to their maneuverability.
    • Stiff boards hold edges, speed, turn better and have better stability at high speeds.

Part3

Choosing the right Bindings and Boots

  1. Image titled Choose a Snowboard Step 8
    1

    Make sure your bindings fit your board. There are many varietes of binding mounts, differentiated by their placement on the board. The most common are 2×4 and 4×4, which are simply 2 rows of holes for mounting bindings. More complex systems, like the Burton 3D insert pattern, can help you attach any type of binding to your board. Check you bindings to see how they attach and match this to your board.

    • Standard bindings attach to any 2×4 or 4×4 pattern.
    • Specialized bindings like the Burton 3D Disk or Burton EST are made to only attach to the Burton 3D pattern.[7]
  2. Image titled Choose a Snowboard Step 9
    2

    Choose binding stiffness based on your experience. Newer riders should aim for short, flexible binding backs (the part behind your heel). This allows them to feel comfortable and in control. However, performing precise maneuvers or turning at high speeds is much easier with high, stiff bindings.

    • Freestyle riders and trick riders usually like flexible bindings because they make landings easier on jumps.
    • Racers and riders who prefer thick, fresh powder prefer stiff bindings for control in deep snow.[8]
  3. Image titled Choose a Snowboard Step 10
    3

    Know that the binding system is a matter of preference. There are a variety of methods to securing your feet to bindings, from straps and cranks to quick-entry speed bindings. Neither method affects your riding very much, so choose the system that your prefer.
  4. Image titled Choose a Snowboard Step 11
    4

    Choose boots that fit comfortably without constricting your feet. You want to shop for snowboard boots pretty much like you shop for any other shoe. Make sure that you have room to wiggle your toes and your heel stays firmly in the shoe as you move around. If you feel any rubbing or pain, try a new size.

    • Make sure you try on snowboard boots with thick winter socks. These will add up to an inch around your foot, which will make a really big difference when you try to squeeze them on at the mountain.

Part4

Choosing Boards Based on Your Riding Style

  1. Image titled Choose a Snowboard Step 12
    1

    Choose an “all-mountain board” for beginners or riders who want a versatile board. All-mountain boards are equally at home heading down the mountain and hitting jumps at the terrain park. They blend speed and maneuverability well, and are thus the perfect board for beginner riders or someone who wants to board downhill, half-pipes, or backcountry in the same day.

    • Size: If you stand the board up on it’s end, the top should reach between your nose and chin.
    • Directional Twin-Tip This hybrid shape can comfortably ride with either direction facing forward, but the front end is often tapered up slightly to make it faster downhill.
    • Camber Type: All-mountain boards usually come in camber shapes which curve upward. However, beginner riders should try a rocker-style because of the added maneuverability and turning forgiveness.[9]
  2. Image titled Choose a Snowboard Step 13
    2

    Choose a “freestyle board” if you like to do a lot of tricks. Freestyle boards are usually smaller so they don’t get in the way during tricks. They are highly maneuverable and light, but they have less speed and stability when going downhill. That said, they can still be used to to bomb down a mountain in a pinch.[10]

    • Size: Since freestyle boards are usually smaller, choose one that feels comfortable to you. Stand the board up and look for something that reaches between your shoulder and chin.[11]
    • Twin-tip: Freestyle riders will almost always want a twin-tip design, as this allows them to comfortably board in either direction after jumps or tricks.
    • Camber Type: Most freestyle riders prefer a “camber” shape, where the board curves slightly upward between the tips. This spring-loads the board to give you maximum pop on jumps.
  3. Image titled Choose a Snowboard Step 14
    3

    Choose a “freeride board” for downhill riding. These boards are made to be quick and stable at high speeds. They are generally stiffer and have the bindings slightly set towards the back of the board.

    • Size: Usually the longest board type, a freestyle board will often reach near your forehead when stood on end.
    • Directional: All freeride boards are directional, meaning there is a designated front end to increase speed.
    • Camber Type: Freeride boards come in a variety of shapes, but one of the most common is a rocker/camber/rocker hybrid that curves down near the tips and up in the center.
  4. Image titled Choose a Snowboard Step 15
    4

    Choose a “powder board” for a smooth ride in fresh snow. Powder boards are usually made for downhill riders who encounter a lot of fresh, soft snow. They have longer or tapered noses and raised ends to help stay on top of powder. The bindings are generally set towards the back of the board to keep the front end up.

    • Size: Generally longer to increase surface area and speed, since powder boards are not often used for tricks.
    • Directional: Most powder riders prefer directional boards, since the design allows them to sail smoothly over fresh snow.
    • Camber Type: Powder boards usually have a rocker-shape, which is when the entire board curves slightly upward. This keeps the tip and tail elevated so it doesn’t get caught in the deep powder.

    Source: Wikihow

Leave a reply

Message

Name

Website